Telex Echelon 25XT User Manual download pdf (Page 3)

Page 1

Headband Size Adjustment

To adjust the headband size, move the

earcup sliders up or down on the

headband. Size is properly adjusted

when the earcups are centered over the

ears. It is important to make the same

adjustments to both sides of the

headband to keep the headband and

pad properly centered over the head.

HIGH MEDIUM LOW

Comfort Cam™

ADJUSTMENT KNOB SETTINGS

Headband Pressure Adjustment

There are three pressure settings for

headband comfort. Increasing the

pressure will improve the seal between

the earcup and the head for greater

noise reduction. To change the pressure

setting, remove the headset and fold the

earcup inward as shown, then rotate the

Comfort Cam adjustment knob to the

desired setting. Repeat for both earcups.

Both sides of the headband should be

set to the same pressure setting to keep

the headband properly centered on the

head.

Figure 1

Headband Size Adjustment

Figure 2

Headband Pressure Adjustment

Left or Right Side Microphone Placement

1. Rotate the boom as shown.

2. Reshape the boom so that the

microphone will be at the

corner of the mouth.

Figure 3

Rotating and Reshaping the

Boom

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments